Rapid Test Rockwell Hardness Tester AT130D
Description
Even operating following to the Rockwell principle according to DIN and ASTM, measuring is not influenced by deflections. The reference point is the surface of the component itself. Surface preparation is needed only where measuring takes place. With an easy movement of the lever pre-load and load are applied. With the return movement, load is taken away, and reading is made. Measuring takes no more than 3sec. (a few sec. more for very soft materials).
Working principle: Rockwell
Preload: 10kgf (98N)
Loads: 60kgf, 62.5kgf, 100kgf, 125kgf, 150kgf, 187,5kgf (N 588, 613, 981, 1226, 1471, 1839)
Load time: manual selection
Standard scales: HRA, HRB, HRC, HRD, HRF, HRG
Kg/mm²-N/mm²
HBW2.5/187.5-HRW2.5/62.5
Measuring range:10-70HRC
Indenter protective cover: diameter 11mm,height 14mm
Indenter extension rod: 100mm(can customized)
Indenter stroke:420mm
Load time: 2-3 seconds
Reading: on display
Output interfaces: RS232
Working conditions: 0°C-50°C
Accuracy : Rockwell - ASTM E-18 - ISO6508
Testing space: testing throat depth 220mm,max height 420mm
Load application method: manual with automatic pre load application
Minimum measurable diameter: 3mm
Selectable functions: scales, tolerances, calibration,error alarm
Power supply: 100-240VAC,50/60HZ 18W
Working area dimensions: STAND TX: Max. measurable height:240mm ,depth: 560mm, height: 875
Specimen dimension:240x335mm or 340x450mm
Gross Weight: 97KG
Product Tags:
|
|
Rapid Tes Rockwell Hardness Tester 420mm Indenter Stroke For Very Soft Materials Images
|
